锁定重建解剖型120°钢板(一孔选两种螺钉)

锁定重建解剖型120°钢板(单孔选择两种螺钉
  • 锁定重建解剖型120°钢板(一孔选两种螺钉)
  • 锁定重建解剖型120°钢板(一孔选两种螺钉)
  • 锁定重建解剖型120°钢板(一孔选两种螺钉)

简短描述:


产品细节

产品标签

材料:医用纯钛

厚度:2.4毫米

产品规格

项目编号

规范

10.13.06.12117101

年代

12孔

132毫米

10.13.06.12217101

正确的

年代

12孔

132毫米

10.13.06.13117102

13个孔

138毫米

10.13.06.13217102

正确的

13个孔

138毫米

10.13.06.14117103

l

14个孔

142毫米

10.13.06.14217103

正确的

l

14个孔

142毫米

指示:

下颌骨损伤:

下颌骨粉碎性骨折、不稳定骨折、感染性骨不连、骨缺损。

下颌骨重建:

第一次或第二次重建,用于移植骨或缺陷的离解骨块(如果第一次手术没有植骨,重建板只有确保承担有限的时间内,必须第二骨移植物操作支持重建馅饼)。

特点和优点:

节距排重建板是为在操作中固定而专门设计的,改善了特定区域的应力集中现象和疲劳强度。

一孔选择两种螺钉:锁定颌面重建解剖板可实现锁定和非锁定两种固定方式。锁定螺钉固定骨块,同时牢固锁定钢板,犹如内置外固定支架。无锁螺钉可作夹角加压固定。

匹配的螺丝:

φ2.4毫米自攻螺钉

φ2.4毫米锁紧螺钉

匹配的仪器:

医用钻头φ1.9*57*82mm

十字螺丝刀:SW0.5*2.8*95mm

直形快速联轴器手柄


下颌骨作为面部美容的重要器官,其形态在面部美容中起着重要的作用。外伤、感染、肿瘤切除等因素均可引起缺损。下颌骨缺损不仅影响患者的外貌,还会引起咀嚼、吞咽、言语等功能的异常。理想的下颌重建不仅要达到下颌骨的连续性和完整性,恢复面部外观,还要为术后咀嚼、吞咽、说话等生理功能的恢复提供基本条件。

下颌骨缺损的原因

肿瘤治疗:成釉细胞瘤、粘液瘤、癌、肉瘤。

撕脱性创伤:最常见的原因是高速伤害,如火器、工业事故,偶尔也有机动车碰撞。

炎症或感染性疾病。

重建的目标

1.恢复面部下三分之一和下颌骨的原始形状

2.维持下颌骨的连续性,恢复下颌骨与周围软组织的空间位置关系

3.恢复良好的咀嚼、吞咽和说话功能

4.保持足够的气道

下颌缺损的显微重建有四种类型。创伤and tumor resection of the mandible may affect appearance and lead to functional deficits such as malocclusion due to unilateral muscle injury.In order to repair the appearance defect and reconstruct the function, many surgical methods have been developed, and the difficulty of the successful reconstruction of the mandible lies in the selection of the best method.Because of the complexity of mandibular defect, a set of simple, practical and generally accepted systematic classification and treatment methods is still blank.Schultz et al. demonstrated a new simplified classification method and the corresponding method for the reconstruction and repair of the mandible through practice, which was published in the latest journal of PRS.This classification focuses on vascular integrity in the recipient area, with a view to accurately repairing complex mandibular defects by microsurgical means.The method is first divided into four types according to the complexity of reconstructive surgery.The lower midline of the mandible was the boundary. Type 1 had a unilateral defect that did not involve the mandibular Angle, type 2 had a unilateral defect involving the ipsilateral mandibular Angle, type 3 had a bilateral defect involving neither side of the mandibular Angle, and type 4 had a bilateral defect involving the unilateral or bilateral mandibular Angle.Each type is further divided into type A (applicable) and type B (not applicable) according to whether the ipsilateral vessels are suitable for anastomosis. Type B requires anastomosis of the contralateral cervical vessels.For type 2 cases, it is necessary to indicate whether the condylar process is involved in order to decide which graft material to use: Unilateral condylar involvement is 2AC/BC, and no condylar involvement is 2A/B.Based on the above classification and considering the skin defect, the length of the mandibular defect, the need for dentures, and other special circumstances, the surgeon further determines the type of free bone flap to be used.

预成型重建板用于口腔和颌面外科,创伤和重建外科。这包括初级下颌重建,粉碎性骨折和临时桥接等待延迟的二次重建,包括无牙和/或萎缩的下颌骨折,以及不稳定骨折。患者受益-通过寻求达到令人满意的美容效果和减少手术时间。下颌骨专用钢板消除了弯曲钢板引起的机械应力。


  • 前一:
  • 下一个:

  • Baidu